INDUSTRIAL VEHICLE
MAN 33.480 6×6
The vehicle is equipped with a stainless steel tank in which the extinguishing liquid is located and with a unit for concentrated ABC extinguishing powder. The pump or water cannon on the roof of the vehicle can be operated from the vehicle cab.
The B foam dosing system is fully automated and is dependent on water flow and gives a constant equal concentration of foam.
The powder extinguishing system consists of a control monitor on the roof and a pipe with a special powder nozzle – System MGS-P-1000. The CAFS system enables the production of lightly compressed foam at very low foaming percentages (0.2-1 %) and with low water consumption. ln this way, greater efficiency is achieved than when extinguishing with foam B.
 
			The powder system consists of a roof monitor, a dust tank and naval winches with special powder nozzles. This MGS P-1000 system provides high efficiency in extinguishing large areas with powder ina refinery.
MONITOR:
With a flow rate of 4500 l / min at a pressure of 10 bar for foam and water it is controlled remotely from the cab of the vehicle where the control is located powder dosing with a flow rate of 45 kg/ s.
SPECIFICATIONS
| CHASSIS | MAN 33.480 6×6 | 
| CONSTRUCTION | Welded stainless steel pipe construction, lined with aluminum sheets | 
| WATER TANK | 4000l, stainless steel 316 | 
| WATER CANON | 4500l / min at 10 bar | 
| FOAM TANK A/B | 4000l stainless steel 316, 5000l stainless steel 316 | 
| UNIT FOR ABC POWDER | 2 x500 kg, 45 kg/s – Type MGS P-1000 | 
| WATER PUMP | 8500 l/min at 10 bar, possibility of pump operation while driving | 
| FOAM A SYSTEM | Proportional type with LED display – MGS FOAMATIC 6000 | 
| FOAM B SYSTEM | Proportional, precision type with LED disp.-MGS CAFS C2000 | 
| EXTINGUISHING WINCH | 2 x DN38 30 m long with high pressure powder nozzle, 2 x DN 32 30 m long with foam and water nozzle and withspecial CAFS nozzle | 
| CONTROLS | MGS-SNAV | 
| DIMENSIONS | 8920 x 2500 x 3650 mm | 
EQUIPMENT:
| Foam mixer and foam nozzles, chainsaw and standard tank equipment | 
Schematics
 
			Gallery
 
			